Cold roof
A cold roof is roof in which the thermal insulation layer is located immediately above or between the ceiling joists meaning that everything above the insulation, such as the rafters, and any roof space, will be colder than the living space below it.
When warm, damp air permeates up through the ceiling and reaches the cold roof space, the change in temperature can result in condensation forming. Adequate roof space ventilation must be provided therefore to remove this air. This requirement, and the need for preventative measures to tackle cold bridging, means that warm roofs can be preferable.
A warm roof is one in which the insulation layer is laid on top of roof structure (or above the loft or attic space in the case of pitched roofs) so that the roof structure or roof space is closer to the inside temperature and so the risk of condensation is reduced.
Particular care must be taken when installing loft insulation, as this can convert a pitched roof from a warm to a cold roof. Ventilation must then be provided to prevent the accumulation of moist air and so condensation, as this can cause the roof structure to deteriorate and ultimately to fail.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Your views needed - a strategy for the professions, trades and occupations.
Confronting competency, codes, capacity and costs.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
















